HP Visualize c100 Service Handbook page 154

Boot Console Interface
Displaying and Setting Paths
The boot paths are displayed in Mnemonic Style
Notation, as shown in Table 51.
Table 51 Mnemonic Style Notation for Boot Paths
Built-in
FWSCSI
Optional
Built-in SCSI
Built-in LAN
To display the current setting for a particular system
path, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter, and then
type the following at the prompt:
where path_type is one of the path types listed in Table
50.
For example, to get the path to the primary boot
device, follow the directions in "Accessing the Boot
Console Interface" earlier in this chapter, and then
type the following at the prompt:
150
I/O Type Specification Format
core.fwscsi.scsi_address.logical_unit_number
slotn.fwscsi.scsi_address.logical_unit_number
core.scsi.scsi_address.logical_unit_number
core.lan.server_address.init_timeout.io_timeout
path path_type
path primary