Chap5.doc 90 Thu Jul 25 10:24:29 1996
Figure 19
Field Replaceable Units
FRU Removal and Replacement
Main Tray Assembly
Perform the following steps to remove the main tray
assembly from the system unit:
1 Completely loosen the four thumb screws on the rear of
the system unit, as shown in Figure 19.
Removing the Main Tray Assembly
2 Place one hand on the top of the system unit and push,
while using your other hand to pull on the handle on the
rear panel. See Figure 19.
3 Slide the main tray assembly out of the chassis.
90