Field Replaceable Units
FRU Removal and Replacement
Rear Panel
Before removing the Rear Panel, perform the follow-
ing procedures:
•
•
•
See the section on Removing EISA and GSC Option
Boards, earlier in this chapter for more information.
Perform the following steps to remove the rear panel:
1 Remove the 7 screws, as shown in Figure 43.
Figure 43
Removing the Rear Panel
2 Move the rear panel away from the main tray until it
114
Remove the Main Tray Assembly from the system unit.
Remove the System Fans
Remove the EISA boards and handle
clears the connectors.