HP Visualize c100 Service Handbook page 161

Displaying and Setting the Monitor Type
The MONITOR INFORMATION table reappears with
the new monitor shown in slot0.
Slot # HPA State
--------- -----------------
graphics3 f4000000 Present
graphics4 f6000000 Empty
core.RS232_.9600.8.none
Current Console Path:
Stable Store Console Path:
Trying to change the monitor type on a slot that cannot
support that monitor results in a warning, as shown in
the following example:
Config. Menu: Enter command
MONITOR INFORMATION
Reminder: SGIC only supports one type of monitor.
Changing its monitor type will not have any effect.
Slot # HPA State
------ --- ----
graphics3f4000000Present Fixed
graphics4f6000000Empty
Current Console Path:core.RS232_.9600.8.none
Stable Store Console Path:GRAPHICS3
Boot Console Interface
ResolutionFrequency Class
------------------- -------
Fixed
GRAPHICS3
monitor graphics3
ResolutionFrequency
-------------------
Class
-----
157