Kyocera Mita KM-3050 Advanced Operation Manual page 199

ADVANCED OPERATION GUIDE
Original Image
Set the default original document type. The available default settings are
shown below.
Item
Text+Photo
Text
Photo
Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Original Image.
3
Select the default for
[Text+Photo], [Text]
or [Photo].
4
Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600×600 dpi,
400×400 dpi Ultra Fine, 300×300 dpi, 200×400 dpi Super Fine, 200×200
dpi Fine, 200×100 dpi Normal.
Use the procedure below to select the default resolution setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Scan Resolution.
Description
Text and photos together.
Only text, no photos.
Only photos, no text.
Common Settings - Original Image
Set the default original document type.
Text
Text+Photo
Status
System Menu
Photo
Cancel OK
10/5/2006 10:10
6-23