Kyocera Mita KM-3050 Advanced Operation Manual page 208

System Menu
6-32
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Auto Image Rotation.
3
Select the default for
[Off] or [On].
4
Press [OK].
Form Overlay (Copy)
Select the default form and form density from Form Box for form overlay
for copy jobs.
NOTE:
Refer to page 1-38 for Form Overlay (Copy).
The table below shows the available settings.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Form Overlay (Copy).
3
Press [Select Stored Form].
4
Press [+] or [–] to
enter the form
density.
5
Press [Select Form].
Common Settings - Auto Image Rotation
Select the default Auto Image Rotation setting.
Off
Status
Common Settings - Form Overlay(Copy)
Set the default form overlay for copies.
Density(10 - 100)
Off
100
Select
Stored Form
Status
ADVANCED OPERATION GUIDE
On
Cancel OK
10/5/2006
%
None
Select Form
Cancel OK
10/5/2006
10:10
10:10