Table of Contents
Advertisement
Copying Functions
1-32
If you selected [1-sided >> Booklet], choose the binding orientation in
Finishing.
5
If you choose [1-sided >> Booklet] or [2-sided >> Booklet], you can add the
cover. Press [Cover], select [Cover] and press [OK].
6
If the optional 3000 Sheet Document Finisher and the center folding unit
are installed, [Bind and Fold]* can be selected. Press [Saddle Stitch] and
select [Bind and Fold]. Press [OK]. Up to 16 sheets (64 pages) can be
bound with center margin stapling and center folding.
*
Capability of stapling finished copies in the center and automatically
folding them in the center.
7
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
8
Press [OK].
9
Place the originals in the document processor or on the platen and press
the Start key.
NOTE:
When using the platen, be sure to place the originals in page
order.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
ADVANCED OPERATION GUIDE
Advertisement
Table of Contents
