Kyocera Mita KM-3050 Advanced Operation Manual page 188

System Menu
6-12
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original/Paper Setup and then [Next]
of Media Type Setting.
3
Press [Next] for the media type whose weight you want to change.
NOTE:
OHP Transparencies is not displayed.
4
Press [Change] of Media Weight.
5
Select the weight
and press [OK].
The previous screen
reappears.
6
To change the
duplex printing
settings for Custom
1 (-8), press
[Change] of Duplex,
select [Prohibit] or
[Permit] and press
[OK].
The previous screen
reappears.
7
To change the name for Custom 1(-8), press [Change] of Name to enter
the name and press [OK].
NOTE:
Refer to the Operation Guide for entering characters.
Common Settings - Media Weight
Select weight of paper.
Please refer to the manual for details.
Extra Heavy Heavy 3 Heavy 2
Normal 2 Normal 1 Light
Status
Common Settings - Duplex
Allow duplex printing.
Prohibit
Status
ADVANCED OPERATION GUIDE
Heavy 1 Normal 3
Cancel OK
10/5/2006
Permit
Cancel OK
10/5/2006
10:10
10:10