Table of Contents
Advertisement
System Menu
6-26
File Format
Each Page
NOTE:
Refer to page 2-19 for file separation.
Use the procedure below to select the default file separation setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of File Separation.
3
Select the default for
[Off] or [Each Page].
4
Press [OK].
Density
Set the default density. The available default settings are shown below.
NOTE:
You cannot specify the density if you have selected [Full Color] in
Color Selection.
Item
Manual (Normal 0)
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Density.
Description
Each scanned page is created into a
separate file.
Common Settings - File Separation
Select the default file separation setting.
Off
Status
Description
Set to 0 (Normal) in the Manual density.
Set to Auto density.
ADVANCED OPERATION GUIDE
Each Page
Cancel
OK
10/5/2006
10:10
Advertisement
Table of Contents
