Table of Contents
Advertisement
System Menu
6-30
3
Press [+] or [–] for
the Border and
Gutter width to
erase.
You can use the
number keypad to
enter the number
directly.
4
Press [OK].
Margin Default
Set the default margin. The table below shows the measurement ranges
that can be set.
Input units
Inch models
Metric models
Use the procedure below to set the default margin width.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Margin Default.
3
Use the [+] or [-] key
to enter the margin
widths for Left/Right
and Top/Bottom.
You can use the
number keypad to
enter the number
directly.
4
Press [OK].
Common Settings - Border Erase Default
Select the default border erase width.
Use [-]/[+] or the numeric keys to enter a number.
Border(0.00 - 2.00)
"
0.23
# Keys
Status
Paper is remaining in Document Processor.
-0.75 to 0.75" (in 0.01" increments)
-18 mm to 18 mm (in 1 mm increments)
Common Settings - Margin Default
Select the default margin width.
Use [-]/[+] or the numeric keys to enter a number.
L/R(-0.75 - +0.75)
"
0.23
# Keys
Status
Paper is remaining in Document Processor.
ADVANCED OPERATION GUIDE
Gutter(0.00 - 2.00)
"
0.47
# Keys
Cancel
OK
10/5/2006
Range
T/B(-0.75 - +0.75)
"
0.47
# Keys
Cancel
OK
10/5/2006
10:10
10:10
Advertisement
Table of Contents
