Kyocera Mita KM-3050 Advanced Operation Manual page 227

Duplex
Copies
ADVANCED OPERATION GUIDE
Select binding orientation for duplex mode. The table below shows the
available settings.
Item
2-sided Bind
ShortEdge
2-sided Bind
LongEdge
1-sided
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided], [2-
sided Bind
LongEdge], or [2-
sided Bind
ShortEdge].
4
Press [OK].
Set the default number of copies, from 1 to 999.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
Description
Shorter edge
bound
Longer edge
bound
No duplex mode
Printer - Duplex
Set the default duplex mode.
1-sided
Status
System Menu
Finish
2-sided 2-sided
Bind LongEdge Bind ShortEdge
Cancel OK
10/5/2006 10:10
6-51