Auto Continue - Kyocera Mita FS-1800 User Manual

>Auto Continue >
Mode
MENU
?
ENTER
Auto Continue Setting
If an error that still allows you to continue printing occurs (Memory
Overflow Press GO, Print overrun Press GO, KPDL error Press
GO, and File not found Press GO), the next received data is
automatically printed after a set period of time elapses. For example, if the
printer is shared over a network as a network printer and one person
causes one of the above errors, after the set period of time elapses, the data
sent from the next person is printed.
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
>Auto Continue >
Mode On
5
Press the ENTER key. The message display shows a blinking
question mark (?).
>Auto Continue >
Mode ? On
1-121
key and select Others >.
>
key to select Auto Continue >.
Operating the Operator Panel