Kyocera Mita KM-3050 Advanced Operation Manual page 198

System Menu
6-22
3
Select [Top Edge
Top] or [Top Edge
Left] for the default.
4
Press [OK].
Continuous Scan
Set the continuous scan defaults. The available default settings are shown
below.
Item
Off
On
Refer to page 1-10 for Original Orientation.
Use the procedure below to select the default settings for continuous
scanning.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Continuous Scan.
3
Select [Off] or [On]
for the default.
Use the procedure below to select the default quality setting for originals.
4
Press [OK].
Common Settings - Original Orientation
Select the default original orientation.
Top Edge Top
Status
Description
Continuous scan not performed
Continuous scan performed
Common Settings - Continuous Scan
Select the default Continuous Scan setting.
Off
Status
ADVANCED OPERATION GUIDE
Top Edge Left
Cancel OK
10/5/2006 10:10
On
Cancel OK
10/5/2006 10:10