Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
3
Press [Off] or [On].
4
Press [OK].
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors. Options are between 5 and 495 seconds
(every five seconds).
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not
appear.
Use the procedure below to set the automatic error clear delay.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Error Clear Timer.
3
Press [+] or [–] to
enter the time until
printing restarts.
You cannot use the
number keypad to
enter this value.
4
Press [OK].
Date/Timer - Auto Error Clear
If an error occurs, automatically clear it after
a set amount of time elapses.
Off
Status
Date/Timer - Error Clear Timer
Set the amount of time to wait before automatically clearing errors.
Use [-]/[+] to enter a number.
(5 - 495)
Status
System Menu
On
Cancel
OK
10/5/2006
sec.
Cancel
OK
10/5/2006
6-75
10:10
10:10
Advertisement
Table of Contents
