Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
The Folder (SMB) Address
1
Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
The table below explains the items to be entered.
Item
Host Name*
Path**
Login User
name
Login
Password
*
If you specify a port number other than the default (139), use the
"
Host name: port number
**
Use single-byte alphanumeric characters to specify the path. If you
use Japanese (double-byte) characters, transmission will fail.
NOTE:
Refer to the Operation Guide for entering characters.
2
Check if the entries are correct and press [OK].
NOTE:
Press [Connection Test] to check the connection to the computer
you chose. If the connection fails, check the entries you made.
11
Check if the destination entry is correct and press [Register]. The
destination is added to the Address Book.
Description
Host name or IP address of the
sending computer
Path to the folder used to save
files
"
"
E.g.
\User\ScanData
User name for folder access
For example,
abcdnet\james.smith
Password for folder access
"
format. (E.g. SMBhostname:140)
Address - Folder Path Entry
SMB
Host Name
Path
FTP
Login
User Name
Login
Password
Status
System Menu
Max. No. of
Characters
62 chars
126 chars
62 chars
62 chars
Connection
Test
Cancel
OK
10/5/2006
10:10
6-79
Advertisement
Table of Contents
