Table of Contents
Advertisement
Copying Functions
1-6
NOTE:
You can conveniently select in advance the size and type of
paper that will be used often and set them as default (refer to Paper Size
and Media Type Setup for Multi Purpose Tray on page 6-9).
Use the procedure below to select the paper size and media type.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Org./Paper/Finishing], [Paper Selection] and then [MP Tray
Setting].
4
Press [Standard
Sizes 1 ], [Standard
Sizes 2 ], [Others] or
[Size Entry] to select
the paper size.
If you select [Size
Entry], press [+] or [–
] to specify X
(horizontal) and Y
(vertical) sizes. You
can enter the size
directly using the
numeric keys after
pressing [# Keys].
5
Press [Media Type].
6
Press [Media Type] to select paper type, and press [OK].
7
Press [OK].
8
Press [OK].
9
Press the Start key to start scanning the originals.
10
When the machine is ready the confirmation screen for the specified paper
appears. Load the required paper in the Multi Purpose tray and press
[Continue] to start copying.
Ready to copy.
Paper Selection - MP Tray Setting
Standard
Ledger
Letter
Sizes 1
Legal
Statement
Standard
Sizes 2
8.5x13.5"
OficioII
Others
Size Entry
Status
Ready to copy.
Paper Selection
X
(3.86 - 11.69)
Standard
Sizes 1
11.00
Standard
Sizes 2
# Keys
Others
Y
(5.83 - 17.00)
Size Entry
# Keys
Status
ADVANCED OPERATION GUIDE
Copies
Letter
Executive
Plain
Media Type
OK
10/5/2006
Copies
"
"
8.50
Plain
Media Type
OK
10/5/2006
1
10:10
1
10:10
Advertisement
Table of Contents
