Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
File Format
Select the default file type to send the scanned originals. The available
default settings are shown below.
File Format
TIFF
PDF
JPEG
High Comp. PDF*
*
Only displayed when the optional PDF upgrade kit has been used.
NOTE:
Refer to page 2-14 for file formats.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of File Format.
3
Select the default file
format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are
shown below.
File Format
Off
Description
Send files in TIFF format.
Send files in PDF format.
Send files in JPEG format.
Send files in High Comp. PDF format (refer
to page 2-16).
Common Settings - File Format
Set default file type.
TIFF
PDF
JPEG
Status
Description
No file separation performed (all the pages
are compiled in one file).
System Menu
High Comp.
PDF
Cancel
OK
10/5/2006
10:10
6-25
Advertisement
Table of Contents
