Table of Contents
Advertisement
System Menu
Silent Mode
Auto Color Correction
6-68
2
Press [ ], [Adjustment/Maintenance] and [Change] of Display Brightness.
3
Press [1] - [4]
(Darker- Lighter) to
adjust brightness.
4
Press [OK].
Make the machine run more quietly. Select this mode when the running
noise is uncomfortable.
Use the procedure below to set Silent mode.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Change] of Silent Mode.
3
Press [Off] or [On].
4
Press [OK].
This setting allows you to adjust the detection level used by the machine
to determine whether the original is color or monochrome during sending.
Setting a lower value will result in more originals being identified as color,
while a larger value will tend to increase the number of originals being
identified as monochrome.
Adjustment/Maintenance - Display Brightness
Set the brightness of the screen.
Darker
1
2
Status
Adjustment/Maintenance - Silent Mode
Make after-printing process run more quietly.
*This may increase the time need to prepare
for the next job.
Off
Status
ADVANCED OPERATION GUIDE
Lighter
3
4
Cancel
OK
10/5/2006
10:10
On
Cancel
OK
10/5/2006
10:10
Advertisement
Table of Contents
