Kyocera Mita KM-3050 Advanced Operation Manual page 121

Rev-3
Table of Contents

Advertisement

ADVANCED OPERATION GUIDE
Setting of page size and pen
When you have selected KC-GL as emulation mode, you can set the page
size, one of eight kinds of pens, and thickness of each pen.
The table below shows the available settings.
Setting item
Page Set
Pen Adjust
NOTE:
The default setting of thickness of pen is pen 1:1 dot, pen 2:2
dots, pen 3:3 dots...pen 8:8 dots.
Use the procedure below to select the interface.
1
Press the System Menu Key.
2
Press [Printer] > [Change] in Emulation > [KC-GL] > [Page Set].
3
Select the print size.
NOTE:
[Special Size] is the size designated in Prescribe SPSZ
command. For details of Prescribe command, refer to the Prescribe
Command Reference Manual.
4
Press [OK]. The previous screen reappears.
5
Press [Pen Adjust] > [Change] for the pen for which you want to change
the thickness (1 to 8).
B0, B1, B2, B3, A0, A1, A2, Special Size*
Pen 1 to Pen 8
Printer - Page Set
Select print size for KC-GL.
B0
B1
A1
A2
Status
*: Default setting
Set value
1 to 99 dots
B2
B3
A0
Special Size
Cancel
Printer
OK
10/5/2006
10:10
3-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-4050Km-5050305040505050

Table of Contents