Table of Contents
Advertisement
System Menu
6-36
The table below shows the available settings.
Item
Compression Ratio
Priority
Standard
Quality Priority
Use the procedure below to select the default quality setting for highly
compressed PDF files.
1
Press the System Menu key.
2
Press [Common Settings] and [Next] of Function Defaults. Press [ ] twice
and [Change] of High Comp. PDF Image.
3
Select the default for
[Compression Ratio
Priority], [Standard],
or [Quality Priority].
4
Press [OK].
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table
below shows the available settings.
Item
Off
On
NOTE:
This setting is not displayed when the optional Security Kit is
installed or the Repeat Copy job is set to 0.
Refer to page 1-57 for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
Description
Compression Ratio is given priority with
smaller file size.
Standard quality
Image quality is given priority with larger file
size.
Common Settings - High Comp. PDF Image
Set the default compressed PDF quality level.
Higher quality will make the stored files larger.
Compression
Standard
Ratio Priority
Status
Description
No Repeat Copy is performed.
Repeat Copy is performed.
ADVANCED OPERATION GUIDE
Quality
Priority
Cancel
OK
10/5/2006
10:10
Advertisement
Table of Contents
