Kyocera Mita KM-3050 Advanced Operation Manual page 207

ADVANCED OPERATION GUIDE
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available
settings.
Item
Collate Off
On
Offset Off
Each Set
(Each Page)
NOTE:
Refer to page 1-12 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Collate/Offset.
3
Select the defaults
for Collate and
Offset respectively.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the
available settings.
Item
Off
On
NOTE:
Refer to page 1-49 for Auto Image Rotation.
Description
Collate not performed.
Collate performed.
Offset not performed.
Offset performed. (If [Off]) is selected of
Collate, it is performed [Each Page].)
Common Settings - Collate/Offset
Select the default collate/offset setting.
Collate
Off
Offset Off
Status
Description
No Auto Image Rotation performed.
Auto Image Rotation performed.
System Menu
On
Each Set
Cancel OK
10/5/2006 10:10
6-31