Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
Punch Waste Full Error
Select what to do when the punch waste box becomes full during printing.
Processing
Ignore
Display Error
NOTE:
The messages are displayed when the optional 3000 sheet
document finisher and punch unit are installed.
Use the procedure below to specify the settings for error handling.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Error Handling.
3
Press [Change] at
the error you wish to
change the
handling.
4
Select the error handling method in the selection screen for each of the
errors and then press [OK].
5
The previous screen appears. To set the handling for a different error,
repeat steps 3 and 4.
Description
Printing continues without punching.
Error message to cancel printing is
displayed.
Common Settings - Error Handling
Change
Duplexing Paper Error:
Display Error
No Staple Error:
Change
Not Stapling
Change
Punch Waste Full Error:
Not Punching
End
System Menu
Change
Finishing Paper Error:
Not Stapling
Change
Stapling Limit Error:
Not Stapling
Return to Top
End
10/5/200 6
10:10
6-19
Advertisement
Table of Contents
