Connuniteventdescr (1.3.6.1.3.94.1.11.1.9); Link Table; Connunitlinkunitid (1.3.6.1.3.94.1.12.1.1) - HP StorageWorks 8/20q Reference Manual

Status
Mandatory
Return value
Always returns error status NoSuchName
connUnitEventDescr (1.3.6.1.3.94.1.1 1.1.9)
The description of the event
Syntax
DisplayString
Access
Read-only
Status
Mandatory
Return value
The event description in the form: [Id][timestamp][severity][module][Description]

Link table

The objects described in this section are in a table format indexed by WWN and index. The index is an
index into the link table for the switch. There may be as many link entries as there are ports. An example of
how to access one of these objects, given a WWN of 100000c0dd0090a7, is:
snmpget localhost public
fcmgmt.connSet.connUnitLinkTable.connUnitLinkEntry.connUnitLinkUni
tId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1.
If the agent is able to discover links that do not directly attach to members of its agency and its discovery
algorithm gives some assurance the links are recently valid, it may include these links. Link information
entered by administrative action may be included even if not validated directly if the link has at least one
endpoint in this agency, but should not be included otherwise.
A connectivity unit should fill the table in as best it can. One of the methods for filling this table is to use the
RNID ELS (ANSI document 99-422v0). This allows one to query a port for the information needed for the
link table.
This table is accessed either directly if the management software has an index value or via GetNext. The
values of the indexes are not required to be contiguous. Each entry created in this table is assigned an
index. This relationship is kept persistent until the entry is removed from the table or the system is reset. The
total number of entries are defined by the size of the table

connUnitLinkUnitId (1.3.6.1.3.94.1.12.1.1)

The connUnitId of the connectivity unit that contains this link table.
Syntax
connUnitLinkUnitId
Access
Read-only
Status
Mandatory
Return value
The WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71 C9
00 00 00 00 00 00 00 00.
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 101