Private Enterprise Mib Objects; Private Enterprise Mib Definitions; Fcqxportphysadminstatus (1.3.6.1.4.1.1663.1.3.10.1.1.3); Fcqxportphysadminstatus Read Values - HP StorageWorks 8/20q Reference Manual

6

Private Enterprise MIB Objects

This section covers the implementation details for the Private (Enterprise-specific) Management Information
Base on the HP StorageWorks SN6000 and 8/20q Fibre Channel Switch.

Private Enterprise MIB definitions

This MIB replaces the fcFxPortPhystable module defined in FIBRE-CHANNEL-FE-MIB, and defines
volatile control objects for ports in an SN6000 or 8/20q Fibre Channel Switch. If the switch gets reset,
these values revert back to the default values in the configuration file.

fcQxPortPhysAdminStatus (1.3.6.1.4.1.1663.1.3.10.1.1.3)

The desired state of the FxPort. A management station may place the FxPort in a desired state by setting
this object accordingly. The testing(3) state indicates that no operational frames can be passed. When
a fabric element initializes, all FxPorts start with fcQxPortPhysAdminStatus in the o?fline(2)
state. As the result of either explicit management action or per configuration information accessible by the
fabric element, fcQxPortPhysAdminStatus is then changed to either the online(1) or
testing(3) states, or remains in the offline state.
Syntax
INTEGER {
online(1)–Place port online
offline(2)–Take port offline
testing(3)–Initiate test procedures
}
Access
Read-Read-write
Status
Current
Return value
See Table 37
Table 37

fcQxPortPhysAdminStatus read values

Port
Online
Offline
Diagnostics
Down
See Table 38
Table 38

fcQxPortPhysAdminStatus write values

Port
Online
Offline
Diagnostics
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 171
for fcQxPortPhysAdminStatus read values.
Value
online(1)
offline(2)
testing(3)
offline(2)
for fcQxPortPhysAdminStatus write values.
Value
online(1)
offline(2)
testing(3)