Revisionnumber - HP StorageWorks 8/20q Reference Manual

Table 3 FA-MIB textual substitutions (continued)
Description
FcUnitType

revisionNumber

The revision number for this MIB. The format of the revision value is as follows:
•
(0) = high order major revision number
•
(1) = low order major revision number
•
(2) = high order minor revision number
•
(3) = low order minor revision number
The value is stored as an ASCII value. The following is the current value of 04.00 for this object.
•
(0) = '0'
•
(1) = '4'
•
(2) = '0'
•
(3) = '0'
Syntax
DisplayString (SIZE (4))
Access
Read-only
68 Fibre Alliance MIB Objects
Syntax
INTEGER {
unknown(1)
other(2)–None of the following
hub(3)– Passive connectivity unit supporting loop protocol
switch(4)–Active connectivity unit supporting multiple
protocols
gateway(5)–Unit that converts not only the interface but
also encapsulates the frame into another protocol. The
assumption is that there is always two gateways connected
together. For example, FC <-> ATM.
converter(6)–Unit that converts from one interface to
another. For example, FC <-> SCSI.
hba(7)–Host bus adapter
proxy-agent(8)–Software proxy-agent
storage-device(9)–Disk, CD, tape, and so on
host(10)–Host computer
storage-subsystem(11)–Raid, library, and so on
module(12)–Subcomponent of a system
swdriver(13)–Software driver
storage-access-device(14)–Provides storage
management and access for heterogeneous hosts and
heterogeneous devices
wdm(15)–Waveform division multiplexer
ups(16)–Uninterruptable power supply }