Fcfxportphysoperstatus (1.3.6.1.2.1.75.1.2.2.1.2); Fcfxportphysadminstatus Read Return Values; Fcfxportphysadminstatus Write Return Values - HP StorageWorks 8/20q Reference Manual

INTEGER {
online(1)–Place port online
offline(2)–Take port offline
testing(3)–Initiate test procedures
}
Access
Read-write
Status
Current
Return value
See Table 34
Table 34

fcFxPortPhysAdminStatus read return values

Port
Online
Offline
Diagnostics
Down
See Table 35
Table 35

fcFxPortPhysAdminStatus write return values

Port
Online
Offline
Diagnostics

fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2)

The current operational status of the FxPort. The testing(3) indicates that no operational frames can
be passed. If fcFxPortPhysAdminStatus is offline(2), then fcFxPortPhysOperStatus
should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1), then
fcFxPortPhysOperStatus should change to online(1). If the FxPort is ready to accept Fabric
Login request from the attached NxPort, it should proceed and remain in the linkFailure(4) state
only if there is a fault that prevents it from going to the online(1) state.
Syntax
INTEGER {
online(1)–Login may proceed
offline(2)–Login cannot proceed
testing(3)–Port is under test
linkFailure(4)–Failure after online/testing
}
Access
Read-only
Status
Current
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 151
for fcFxPortPhysAdminStatus read values.
Value
online(1)
offline(2)
testing(3)
offline(2)
for fcFxPortPhysAdminStatus write return values.
Value
online(1)
offline(2)
testing(3)