Fcfxportholdtime (1.3.6.1.2.1.75.1.1.5.1.14); The Status Group; Fcfxportid (1.3.6.1.2.1.75.1.2.1.1.1); Fcfxportbbcreditavailable (1.3.6.1.2.1.75.1.2.1.1.2) - HP StorageWorks 8/20q Reference Manual

Read-only
Status
Current
Return value
Always returns True(1)

fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14)

The maximum time, in microseconds, that the FxPort holds a frame before discarding the frame if it is
unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.
Syntax
MicroSeconds
Access
Read-only
Status
Current
Return value
The default ED_TOV parameter is 2000 (0x7D0).

The Status group

The objects described in this section are in table format, indexed by switch index and port index. An
example of how to access one of these objects is: snmpget localhost public fcFxPortId.1.1.
This group consists of tables that contain operational status and established service parameters for the
Fabric Element and the attached NxPorts. This table contains one entry for each FxPort, and the
operational status and parameters of the FxPorts.

fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)

The address identifier by which this FxPort is identified within the fabric. The FxPort may assign its
address identifier to its attached NxPort(s) during Fabric Login.
Syntax
FcAddressId
Access
Read-only
Status
Current
Return value
The address of each port based on domain, area, and AL_PA. For example, 64 03 00.

fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)

The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer
flow control. The value should be less than or equal to fcFxPortBbCredit.
Syntax
Gauge32
Access
Read-only
Status
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 149