Connunitdomainid; Connunitproxymaster (1.3.6.1.3.94.1.6.1.12); Connunitprincipal (1.3.6.1.3.94.1.6.1.13) - HP StorageWorks 8/20q Reference Manual

Mandatory
Return value
The switch IP address. For example: http://10.0.0.1. Writes not supported, returns NoSuchName.

connUnitDomainId (1.3.6.1.3.94.1.6.1.1 1

The 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading zeros if required.
This should be set to the Fibre Channel address ID, or if it is a switch, it would be set to the domain
controller address. If this value is not applicable, return all bits set to one.
Syntax
OCTET STRING (SIZE(3))
Access
Read-only
Status
Mandatory
Return value
The domain controller address. For example: FF FC 65.

connUnitProxyMaster (1.3.6.1.3.94.1.6.1.12)

A value of yes means this is the proxy master unit for a set of managed units. For example, this could be
the only unit with a management card in it for a set of units. A standalone unit should return yes for this
object.
Syntax
INTEGER {
unknown(1)
no(2)
yes(3)
}
Access
Read-only
Status
Mandatory
Return value
If out-of-band switch, returns yes(3). If in-band switch, returns no(2).

connUnitPrincipal (1.3.6.1.3.94.1.6.1.13)

Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If this value
is not applicable, the return is unknown.
Syntax
INTEGER {
unknown(1)
no(2)
yes(3)
}
Access
Read-only
74 Fibre Alliance MIB Objects