Flight Data Recorder Phase 2
Enhancement (CR_0000106140) - The Flight Data Recorder provides a way to capture and preserve data that is
related to a crash event. Phase 2 adds the capture and preservation of protocol and subsystem-specific information.
CDPv2 Transmit Capability
Enhancement (CR_0000107011) - When a Cisco VoIP phone boots up (or sometimes periodically), it queries the
switch and advertises information about itself using CDPv2. The switch receives the VoIP VLAN Query TLV (type
0x0f) from the phone and then immediately sends the voice VLAN ID in a reply packet to the phone using the VLAN
Reply TLV (type 0x0e). The phone then begins tagging all packets with the advertised voice VLAN ID.
Comware CLI Commands in ProVision Software (Phase 2)
Enhancement (CR_0000114497) - This is the second of several phases that allows a Comware CLI proficient user
to use their Comware CLI knowledge to effectively manage and configure ProVision software switches. This phase
adds 112 additional Comware display commands to the ProVision software CLI.
Multiple VLAN Removal
Enhancement (CR_0000111891) - This enhancement provides the ability to add or delete interfaces from multiple
tagged or untagged VLANs or SVLANs. See "Static Virtual LANs (VLANs)" in the Advanced Traffic Management Guide
for your switch.
Comware CLI Commands in ProVision Software (Phase 4)
Enhancement (CR_0000119301) - This is the fourth and final of four phases that allows a Comware CLI proficient
user to use their Comware CLI knowledge to effectively manage and configure ProVision software switches. This
phase adds 15 additional Comware display commands to the ProVision software CLI. With this addition there are now
245 Comware display commands in the ProVision software CLI. In addition, a number of extended help messages
have been added to the tab help system to provide guidance on the next action for those configuration items that may
not be intuitive due to naming or concept differences between Comware and ProVision software. For details, see the
latest version of the Comware CLI Commands in ProVision Software manual for your switch.