Ifspeed (1.3.6.1.2.1.2.2.1.5); Ifphysaddress (1.3.6.1.2.1.2.2.1.6); Ifadminstatus (1.3.6.1.2.1.2.2.1.7); Ifoperstatus (1.3.6.1.2.1.2.2.1.8) - HP StorageWorks 8/20q Reference Manual

Access
Read-only
Status
Mandatory

ifSpeed (1.3.6.1.2.1.2.2.1.5)

An estimate of the interface's current bandwidth in bits per second. For interfaces that do not vary in
bandwidth or for those where no accurate estimation can be made, this object should contain the nominal
bandwidth.
Syntax
Gauge
Access
Read-only
Status
Mandatory

ifPhysAddress (1.3.6.1.2.1.2.2.1.6)

The interface's address at the protocol layer immediately below the network layer in the protocol stack. For
interfaces that do not have such an address, such as a serial line, this object should contain an octet string
of zero length.
Syntax
PhysAddress
Access
Read-only
Status
Mandatory

ifAdminStatus (1.3.6.1.2.1.2.2.1.7)

The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
Writes not supported.

ifOperStatus (1.3.6.1.2.1.2.2.1.8)

The current operational state of the interface. The testing(3) state indicates that no operational packets can
be passed.
Syntax
INTEGER
Access
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 27