Iproutenexthop (1.3.6.1.2.1.4.21.1.7); Iproutetype (1.3.6.1.2.1.4.21.1.8); Iprouteproto (1.3.6.1.2.1.4.21.1.9) - HP StorageWorks 8/20q Reference Manual

Hp storageworks 8/20q and sn6000 fibre channel switch simple network management protocol reference guide (5697-0409, june 2010)
Hide thumbs Also See for StorageWorks 8/20q:
Table of Contents

Advertisement

Access
Read-write
Status
Mandatory
Return value
Writes not supported.

ipRouteNextHop (1.3.6.1.2.1.4.21.1.7)

The IP address of the next hop of this route. In the case of a route bound to an interface that is realized
from a broadcast media. The value of this field is the agent's IP address on that interface.
Syntax
IpAddress
Access
Read-write
Status
Mandatory
Return value
Writes not supported.

ipRouteType (1.3.6.1.2.1.4.21.1.8)

The type of route. The values direct(3) and indirect(4) refer to the notion of direct and indirect
routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the
corresponding entry in the ipRouteTable object. That is, it effectively disassociates the destination
identified with the entry from the route identified with the entry. It is an implementation-specific matter as to
whether the agent removes an invalidated entry from the table. Accordingly, management stations must be
prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper
interpretation of such entries requires examination of the relevant ipRouteType object.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
Writes not supported.

ipRouteProto (1.3.6.1.2.1.4.21.1.9)

The routing mechanism through which this route was learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts should support those protocols.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
40
MIB-II Objects

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn6000

Table of Contents