Connunitportprotocolop (1.3.6.1.3.94.1.10.1.21); Connunitportnodewwn (1.3.6.1.3.94.1.10.1.22); Connunitporthwstate (1.3.6.1.3.94.1.10.1.23) - HP StorageWorks 8/20q Reference Manual

Hp storageworks 8/20q and sn6000 fibre channel switch simple network management protocol reference guide (5697-0409, june 2010)
Hide thumbs Also See for StorageWorks 8/20q:
Table of Contents

Advertisement

connUnitPortProtocolOp (1.3.6.1.3.94.1.10.1.21)

Bit mask that specifies the driver level protocol(s) that are currently operational. If not applicable, return all
bits set to zero (0). This object has the same definition as connUnitPortProtocolCap.
Syntax
OCTET STRING (SIZE (2))
Access
Read-only
Status
unsupported
Return value
Always returns error status NoSuchName.

connUnitPortNodeWwn (1.3.6.1.3.94.1.10.1.22)

The node WWN of the port if applicable, otherwise all zeros. This should have the same value for a group
of related ports. The container is defined as the largest physical entity. For example, all ports on HBAs on
a host has the same node WWN. All ports on the same storage subsystem have the same node WWN:
::= { connUnitPortEntry 22 }.
Syntax
FcNameId
Access
Read-only
Status
Mandatory
Return value
Returns the World Wide node name of the switch. For example: 10 00 00 C0 DD 00 71 C9.

connUnitPortHWState (1.3.6.1.3.94.1.10.1.23)

The hardware-detected state of the port.
Syntax
INTEGER {
unknown(1)
failed(2)–Port failed diagnostics
bypassed(3)–FCAL bypass, loop only
active(4)–Connected to a device
loopback(5)–Port in external loopback
txfault(6)–Transmitter fault
noMedia(7)–Media not installed linkDown
(8)–Waiting for activity (rx sync)
}
Access
Read-only
Status
Mandatory
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn6000

Table of Contents