Print Settings - Kyocera FS-2100DN Operation Manual

Print Settings

These settings specify the following printing parameters: paper feed source, paper feed mode, duplex printing, override A4/
LTR, emulation mode, print quality, and setting pagination.
The options available in Print Settings are as follows:
• Paper Source (Selecting the paper feed source)...4-39
• MP Tray Priority (the settings for priority paper feed from the MP tray)...4-39
• Paper Feed Mode (Setting the paper feed source)...4-40
• Duplex (Setting the duplex printing)...4-41
• Paper Output (Selecting the output stack)...4-42
• Override A4/LTR (Overriding difference between A4 and Letter)...4-42
• Emulation (Setting the emulation)...4-43
• Font (Selecting the default font)...4-45
• Code Set (Setting the code set)...4-47
• Print Quality (Setting print quality)...4-48
• Page Setting (Setting pagination)...4-50
• User Name (The User Name display settings)...4-53
• Job Name (The Job Name display settings)...4-53
Print Settings:
1
********************- Paper Source
2
MP Tray Priority
3
Paper Feed Mode
Paper Source (Selecting the paper feed source)
You can select the paper source from which the printer feeds paper as the default. If an optional paper feeder(s) is installed,
it can also be set the default paper source.
Paper Source:
1
MP Tray
2 *Cassette 1 ********************-
MP Tray Priority (the settings for priority paper feed from the MP tray)
If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in the paper feed.
1
2
a b
[ Exit ]
3
1
2
a b
3
4
Press [Menu].
Press  or  to select Print Settings.
Press [OK]. The Print Settings menu appears showing a list of
available options.
In the Print Settings menu, press  or  to select Paper
Source.
Press [OK]. The Paper Source screen appears showing a list of the
available paper sources.
The available paper sources are as follows:
MP Tray
Cassette 1 (printer's standard paper cassette)
Cassette 2 to 5 (optional paper feeders (only installed paper
feeders are shown))
Press  or  to select the desired paper source.
Press [OK]. The paper source is set and the Print Settings
menu reappears.
4-39
Operation Panel