Paper Output (Selecting The Output Stack); Override A4/Ltr (Overriding Difference Between A4 And Letter) - Kyocera FS-2100DN Operation Manual

Paper Output (Selecting the output stack)

The Paper Output menu on the operation panel allows you to select either the face-down tray or the faceup tray option for
the output stack.
Note This menu can be used for FS-4100DN, FS-4200DN and FS-4300DN.
Paper Output:
********************- 1 *TopTray FaceDown
2
RearTray FaceUp

Override A4/LTR (Overriding difference between A4 and Letter)

When the Override A4/LTR is turned On using the operation panel, the printer ignores the difference between A4 and
Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs
from the paper size formatting the job.
By default, this feature is On.
Override A4/LTR: a b
1 Off
2 *On
********************-
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
4
Press [OK]. The duplex printing mode is set and the Print
Settings menu reappears.
1
In the Print Settings menu, press  or  to select Paper
Output.
2
Press [OK]. The Paper Output screen appears.
a b
3
Press  or  to select output stack - TopTray FaceDown or Rear
Tray FaceUp.
4
Press [OK]. The output stack is set and the Print Settings menu
reappears.
1
In the Print Settings menu, press  or  to select Override
A4/LTR.
2
Press [OK]. The Override A4/LTR screen appears.
3
Press  or  to select Off or On.
4
Press [OK]. The Print Settings menu reappears.
4-42
Operation Panel