Kyocera FS-2100DN Operation Manual page 90

Media Type:
1 *Plain
********************-
2
Transparency
3
Preprinted
Cassette (1 to 5) Set. (Settings for the cassettes)
To print correctly on paper supplied from the cassettes, use the procedure below to set the paper size and media type.
The options available in Cassette (1 to 5) Set. menu are as follows:
• Cassette (1 to 5) Size (Setting the cassette paper size)...4-28
• Custom Paper Size...4-29
• Cassette (1 to 5) Type (Setting the cassette paper type)...4-32
Cassette (1 to 5) Size (Setting the cassette paper size)
To set the standard sizes A5, A4, B5, Letter, and Legal size for the paper cassette, load the paper and turn the paper size
dial so that the size of the paper you are going to use appears in the paper size window. To load a non-standard paper size
(sizes other than A5, A4, B5, Letter, Legal and A6 (paper cassette)) into a paper cassette, refer to the custom paper sizes
listed on page 4-29.
If the PF-320 optional paper feeder is installed, use the same procedure to load paper into the paper feeder cassettes.
4
Press [OK]. The Media Type screen appears listing the media types
a b
that can be supplied from the MP tray.
The available media types are as follows:
5
Press  or  to select the desired media type.
6
Press [OK]. The media type for the MP tray is set and the MP Tray
Set. menu screen reappears.
1
Pull the cassette out of the printer and set the paper size using the
paper size dial.
Paper Size Dial
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High Quality
CUSTOM 1 to 8
4-28
Operation Panel