Kyocera FS-2100DN Operation Manual page 83

JobFinish Notice (Setting for notification when jobs are finished.)
Notification that a job has finished is sent by E-Mail.
Note To send E-mail from this machine, set the SMTP and POP3 settings to On. For details, refer to the Protocol
Detail (Detailed settings for the network protocol) on page 4-60.
It is necessary to register a mail server. For the method for setting the server, refer to the section on Command Center
RX on page 2-17.
Function:
1 ********************- Duplex
2
EcoPrint
3 File Name Entry
JobFinish Notice: a b
********************- 1 *Off
2 On
Address Entry:
*
Encrypted PDF (Entering the PDF password)
The password of a PDF file can be entered.
Function:
1
********************- Duplex
2
EcoPrint
3
File Name Entry
1
a b
2
3
4
5
a b
ABC
[ Text ]
6
7
1
a b
2
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
Press  or  to select JobFinish Notice.
Press [OK]. The JobFinish Notice screen appears.
Press  or  to select On.
Press [OK]. The Address Entry screen appears.
Enter the address to be notified.
Note Up to 128 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
When user login administration is enabled, the address of the
logged in user is entered.
Press [OK]. Register the address and the Function menu
reappears.
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
Press  or  to select Encrypted PDF.
4-21
Operation Panel