Kyocera FS-2100DN Operation Manual page 84

Password:
*
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG files are printed directly.
Function:
1 ********************- Duplex
2 EcoPrint
3 File Name Entry
TIFF/JPEG Size:
1 *Paper Size
********************-
2 Image Resolution
3
Print Resolution
3
a b
ABC
[ Text ]
4
5
1
a b
2
3
a b
4
5
Press [OK]. The Password entry screen appears.
Enter the password for the PDF file.
Note Up to 256 characters can be entered. For details on
entering characters, refer to Character Entry Method on page A-
2.
Press [OK] to enter the password and the Function menu
reappears.
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
Press  or  to select TIFF/JPEG Size.
Press [OK]. The TIFF/JPEG Size screen appears.
The options available in TIFF/JPEG Size are as follows:
• Paper Size (default)
Images are resized so that they fill the paper size when printed.
• Image Resolution
Image files are printed at the resolution specified in the
resolution information. Images with no resolution information are
printed using the Paper Size setting.
• Print Resolution
Images are printed using a 1-to-1 correspondence between the
image file pixels and printed dots. For example, the printed size
of a 600 × 300-pixel image file is 1 inch × 1/2 inch.
Press  or  to select whether TIFF/JPEG Size mode is enabled.
Press [OK]. The TIFF/JPEG Size setting is set and the Function
menu reappears.
Note Images are automatically rotated during printing to
provide a closer match between the aspect ratios of the
image file and the paper used for printing.
4-22
Operation Panel