Kyocera FS-2100DN Operation Manual page 111

Print Resolution (Selecting the Print Resolution)
You can set the default print resolution in four ways: 300dpi, 600dpi, Fast1200 and Fine1200. The clarity of printed
characters and graphics becomes sharper in this order.
Print Resolution: a b
1 Fine1200
2 *Fast1200
********************-
3
600dpi
Print Density (Selecting the Print Density)
The print density can be adjusted in five steps: from 1 lighter to 5 darker. The default setting is 3.
Print Density:
1 1 lighter
2 2
3 *3 ********************-
3
Press  or  to select whether the EcoPrint mode is enabled.
4
Press [OK]. The EcoPrint mode is set and the Print Quality
menu screen reappears.
1
In the Print Quality menu, press  or  to select Print
Resolution.
2
Press [OK]. The Print Resolution screen appears.
3
Press  or  to select the Print Resolution.
4
Press [OK]. The Print Resolution is set and the Print Quality
menu screen reappears.
1
In the Print Quality menu, press  or  to select Print
Density.
2
Press [OK]. The Print Density screen appears.
a b
3
Press  or  to select the print density from five steps from 1
lighter to 5 darker
4
Press [OK]. The print density is set and the Print Quality menu
screen reappears.
4-49
Operation Panel