Kyocera FS-2100DN Operation Manual page 130

Encryption:
1
********************- Data Encryption
2
WEP Key
Data Encryption (Data Encryption setting)
This sets the encryption method.
Data Encryption: a b
********************- 1 *Disable
2 WEP
WEP Key (WEP Key settings)
This registers the WEP Key.
WEP Key:
-----
WEP Key:
*
S
2
a b
• Data Encryption (Data Encryption setting)...4-68
• WEP Key (WEP Key settings)...4-68
• Preshared Key (Preshared Key settings)...4-69
[ Exit ]
1
2
3
4
1
2
a b
[ Edit ]
3
a b
ABC
[ Text ]
4
5
Press [OK]. The Encryption screen appears.
The following operations are possible:
Note WEP Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to Open
or Shared.
Preshared Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to WPA-
PSK or WPA2-PSK.
In the Encryption menu, press  or  to select Data
Encryption.
Press [OK]. The Data Encryption screen appears.
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 4-67.
Disable or WEP can be selected when Open or Shared is
set.
TKIP, AES or Auto can be selected when WPA-PSK is set.
AES can be selected when WPA2-PSK is set.
Press  or  to select the desired encryption method.
Press [OK]. The Encryption menu reappears.
In the Encryption menu, press  or  to select WEP Key.
Press [OK]. The WEP Key screen appears.
Press[Edit] ([Right Select]). The WEP Key entry screen appears.
Enter the WEP Key using the numeric keys.
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
Press [OK]. The Encryption menu reappears.
4-68
Operation Panel