Kyocera FS-2100DN Operation Manual page 93

Cassette 1 Set.: a b
1
********************- Media Type
2
Other Paper Size
3
Custom PaperSize
[ Exit
Custom PaperSize: a b
1
********************- Measurement
2
Size Entry(Y)
3
Size Entry(X)
[ Exit
Measurement:
********************- 1 *inch
2 mm
Size Entry(Y):
(5.83 - 14.02)
/14.02-"
Size Entry(X):
(4.13 - 8.50)
/*8.50-"
1
In the Cassette # Set. menu, press  or  to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
]
2
Press [OK]. The Custom PaperSize menu screen appears.
]
3
Press  or  to select Measurement.
4
Press [OK]. The Measurement menu screen appears.
a b
5
Press  or  to select the paper size units and then press [OK]. The
unit for entering the paper size is set and the Custom PaperSize
menu screen reappears.
6
Press  or  to select Size Entry(Y).
7
Press [OK]. The Size Entry(Y) menu screen appears.
a b
8
Use the numeric keys or press  or  to enter the paper length.
The range of paper lengths you can set for each cassette is as
follows:
• Cassette (FS-2100D, FS-2100DN):
210 to 356 mm (8.25 to 14.02 inches)
• Cassette (FS-4100DN, FS-4200DN, FS-4300DN):
148 to 356 mm (5.83 to 14.02 inches)
• Paper Feeder PF-320:
162 to 356 mm (6.38 to 14.02 inches)
9
Press [OK]. The entered paper length is set and the Custom
PaperSize menu screen reappears.
10
Press  or  to select Size Entry(X).
11
Press [OK]. The Size Entry(X) menu screen appears.
a b
4-31
Operation Panel