Kyocera FS-2100DN Operation Manual page 229

Copies:
(1 - 999,---)
---
*****copies
Accepted.
Deleting a Private/Stored Job
You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be
automatically deleted when you turn the power off, or after printing, but jobs saved using Stored Job will not be deleted
automatically.
Private/Stored:
l
********************- User01
l
User02
l
User03
l User01:
********************- AllFiles
Q Data01.doc 120313g
Q Data02.doc 120313g
4
a b
5
1
2
a b
3
4
a b
[ Select ]
5
To print 2 or more copies, use the numeric keys or press  or  to
set the number of copies to be printed.
After selecting the multiple copies in the printer driver, you can also
restore to "1" from the operation panel using the same method.
Note --- is displayed first, and it means it according to the set
number of copies when the data of each file is preserved. In this
setting, each set number of copies is printed.
Press [OK]. The message Accepted. appears and the printer prints
the selected job.
In the Job Box menu, press  or  to select Private/Stored.
Press [OK]. The Private/Stored screen appears listing the user
names for stored jobs.
Press  or  to select the user name you entered in the printer
driver.
Press [OK]. The printer displays a list of the jobs stored under the
selected user name.
Press  or  to select the name of the job to be printed.
When [Select] ([Right Select]) is pressed, the file is selected. A
checkmark will be placed on the right of the selected file.
Select the checkmarked file and press [Select] ([Right Select])
again to cancel the selection.
Note To select all files, follow the steps of Select/Deselect All
Files on page 5-26
5-33
Document Box