Kyocera FS-2100DN Operation Manual page 159

Login Password:
*
Login User Name:
Admin
Login Password:
/******************- ●●●●●
Security:
1 ********************- Network Security
2
I/F Block Set.
3 Security Level
Network Security (Network security setting)
Use this procedure to specify the security settings for each of the network protocols used.
IMPORTANT Check with your network administrator when selecting network settings.
The options available in Network Security are as follows:
• WSD-PRINT (WSD-PRINT setting)...4-98
• Enhanced WSD (Enhanced WSD setting)...4-98
• EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)...4-98
• IPP (IPP setting)...4-99
• SSL Setting (SSL Server setting)...4-99
• IPSec (IPSec setting)...4-102
• ThinPrint (Thin Print setting)...4-102
• LAN Interface (LAN Interface setting)...4-104
Network Security: a b
1 ********************- WSD-PRINT
2 Enhanced WSD
3 EnhancedWSD(SSL)
7
a b
ABC
[ Text ]
8
O
b
[ Login ]
9
a b
[ Exit ]
1
2
[ Exit ]
Press [OK]. The Login Password entry screen is displayed.
Enter the Login Password using the numeric keys then press [OK].
The log in screen reappears.
Note The initial setting for the administrator's Login
Password is "Admin".
For details on entering characters, refer to Character Entry
Method on page A-2.
Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Security menu screen
appears.
In the Security menu, press  or  to select Network
Security.
Press [OK]. The Network Security menu screen appears.
4-97
Operation Panel