Paper Feed Mode (Setting The Paper Feed Source) - Kyocera FS-2100DN Operation Manual

MP Tray Priority: a b
1 *Off ********************-
2 Auto Feed
3
Always

Paper Feed Mode (Setting the paper feed source)

This mode specifies how the paper should be fed once the paper feed source and paper type have been chosen. If Auto
is selected, the printer searches for a paper feed source that matches the paper size and type, and paper is then delivered
from that source. If Fixed is selected and there is no matching paper feed source, handling proceeds as specified by Paper
Mismatch for Error Handling. For details on paper feeding when Fixed is selected, refer to Paper Mismatch (Detection
settings for paper size/type errors when the paper source is fixed) on page 4-85. The default setting is Auto. To change the
settings, follow the steps described below.
Paper Feed Mode:
********************- 1 *Auto
2
Fixed
When the Paper Runs Out During Printing
When Paper Feed Mode is set to Fixed, if the paper in the cassette runs out during printing, Load paper in cassette
1. is displayed and the printer stands by. In this event, either replenish the paper in the empty cassette or use the procedure
below to print from another paper source.
Alternative:
********************- B A5
C A4
D
B5
1
2
3
4
1
2
a b
3
4
1
2
a b
Plain
Preprint
Plain
3
In the Print Settings menu, press  or  to select MP Tray
Priority.
Press [OK]. The MP Tray Priority screen appears showing the
available MP tray priority mode options.
Off (The printer driver settings are followed.)
Auto Feed (If Auto is selected in the printer driver and there is paper
in the MP tray then the paper feed will be from the MP tray.)
Always (If there is paper in the MP tray then the paper feed will be
from the MP tray regardless of what is set in the printer driver.)
Press  or  to select the desired MP tray priority mode.
Press [OK]. The MP tray priority mode is set and the Print
Settings menu reappears.
In the Print Settings menu, press  or  to select Paper Feed
Mode.
Press [OK]. The Paper Feed Mode screen appears showing the
available paper feed options.
Press  or  to select the desired paper feed mode.
Press [OK]. The paper feed mode is set and the Print Settings
menu reappears.
While Load paper in cassette 1. is displayed, press [Alt.]
([Left Select]). The Alternative menu screen appears.
Press  or  to select the desired paper feed source and paper size.
Press [OK]. Printing continues.
4-40
Operation Panel