Kyocera FS-2100DN Operation Manual page 153

Network:
1 *Off
********************-
2 On
Power Off Timer (Power off timer settings)
The time until the power turns off can be set. The default setting is 1 hour.
Power Off Timer: a b
********************- 1 *1 hour
2 2 hours
3 3 hours
Auto Err. Clear (Auto error clear setting)
If an error that still allows you to continue printing occurs, the next received data is automatically printed after a set period
of time elapses.
For example, if the printer is shared over a network as a network printer and one person causes one of the above errors,
after the set period of time elapses, the data sent from the next person is printed. The default setting is Off (Auto Error
Clear disabled).
The auto clear errors are:
Print overrun.
KPDL error.
SSD error.
RAM disk error.
SD card error.
Incorrect account ID.
Account error.
3
Press  or  to select the condition to be set.
4
Press [OK]. The screen for the condition selected is displayed.
a b
5
Press  or  to select whether or not to have the power switch off.
6
Press [OK]. Set to switch the power off and the Power Off Rule
menu reappears.
Note Repeat steps 3 to 6 to set for a different condition.
1
In the Timer Setting menu, press  or  to select Power Off
Timer.
2
Press [OK]. The Power Off Timer screen appears.
3
Press  or  to select the time until the power goes off automatically.
The times that can be set are 1 hour, 2 hours, 3 hours, 4 hours, 5
hours, 6 hours, 9 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5
days, 6 days and 1 week.
4
Press [OK]. Set the time until the power switches off and the Timer
Setting menu reappears.
4-91
Operation Panel