Port Binding - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

You can configure all ports based a specified source port using the set config ports command. The
following example configures ports 0–20 based on port 3:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) config edit
8/20q FC Switch (admin) #> set config ports 3
.
.
.
8/20q FC Switch (admin-config)#> config save
8/20q FC Switch (admin)#> config activate
8/20q FC Switch (admin)#> admin end
The following example temporarily changes the administrative state of port 1 to down:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> set port 1 state down

Port binding

Port binding establishes up to 32 switches or devices that are permitted to log in to a particular switch port.
Switches or devices that are not among the established 32 are refused access to the port. To display the
port binding configuration for all ports, enter the show config security portbinding command,
as shown in the following example:
8/20q FC Switch #> show config security portbinding
Configuration Name: default
-------------------
Port
----
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
66 Port configuration
Binding Status WWN
-------------- -----------------------
True 10:20:30:40:50:60:70:80
True 10:20:30:40:50:60:70:80
False No port binding entries found.
True 10:20:30:40:50:60:70:80
True 10:20:30:40:50:60:70:80
False No port binding entries found.
True 10:20:30:40:50:60:70:81
False No port binding entries found.
True 10:20:30:40:50:60:70:80
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.
False No port binding entries found.