The following is an example of the show setup system ipv4 command:
8/20q FC Switch #> show setup system ipv4
System Information
------------------
EthIPv4NetworkEnable
EthIPv4NetworkDiscovery
EthIPv4NetworkAddress
EthIPv4NetworkMask
EthIPv4GatewayAddress
The following is an example of the show setup system ipv6 command:
8/20q FC Switch #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable
EthIPv6NetworkDiscovery
EthIPv6NetworkAddress
EthIPv6GatewayAddress
The following example of the show setup system logging command:
8/20q FC Switch #> show setup system logging
System Information
------------------
LocalLogEnabled
RemoteLogEnabled
RemoteLogHostAddress
The following is an example of the show setup system ntp command:
8/20q FC Switch #> show setup system ntp
System Information
------------------
NTPClientEnabled
NTPServerDiscovery
NTPServerAddress
The following example of the show setup system timers command:
See also
set setup
system, page 222
True
False
10.0.0.254
False
Static
51.68.85.102
8/20q FC Switch #> show setup system timers
System Information
------------------
AdminTimeout
InactivityTimeout
True
Static
10.20.11.32
255.255.252.0
10.20.8.254
False
Static
2001::1/64
fe80::1
30
0
8/20q Fibre Channel Switch command line interface guide 267