Group; Isl Group Member Attributes - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Fibre channel switch
Hide thumbs Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
Table of Contents

Advertisement

group

Description Creates groups, manages membership within the group, and manages the membership of groups in
security sets.
Authority Admin session and a Security Edit session. For information about starting a Security Edit session, see
the security command. The list, members, securitysets, and type operands are
available without an Admin session.
Syntax
group
add [group]
copy [group_source] [group_destination]
create [group] [type]
delete [group]
edit [group] [member]
list
members [group]
remove [group] [member_list]
rename [group_old] [group_new]
securitysets [group]
type [group]
Operands
add [group]
Initiates an editing session in which to specify a group member and its attributes for the existing
group given by [group]. ISL, Port, and MS member attributes are described in
and
Table 1 1
common to all three tables.
Table 9

ISL group member attributes

Attribute
Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
respectively. The group name and group type attributes are read-only fields
Description
Worldwide name of the switch that would attach to the switch. A member
cannot belong to more than one group.
Enables (Chap) or disables (None) authentication using the Challenge
Handshake Authentication Protocol (CHAP). The default is None.
The preferred hash function to use to decipher the encrypted primary secret
sent by the ISL member. The hash functions are MD5 or SHA- 1 . If the ISL
member does not support the primary hash, the switch will use the
secondary hash.
Hexadecimal string that is encrypted by the primary hash for
authentication with the ISL group member. The string has the following
lengths depending on the primary hash function:
MD5 hash: 16-byte
SHA- 1 hash: 20-byte
Hash function to use to decipher the encrypted secondary secret sent by
the ISL group member. Hash values are MD5 or SHA-1. The secondary
hash is used when the primary hash is not available on the ISL group
member. The primary hash and the secondary hash cannot be the same.
8/20q Fibre Channel Switch command line interface guide 149
Table
9,
Table
10,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks sn6000 - fibre channel switch8/20q

Table of Contents