Managing Switch Feature Upgrades; Displaying Feature Licenses; Installing A Feature License Key; Managing Idle Session Timers - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Fibre channel switch
Hide thumbs Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
Table of Contents

Advertisement

Managing switch feature upgrades

The HP StorageWorks 8/20q 4-port Upgrade License enables additional Fibre Channel (FC) ports in four
port increments up to the 20-port maximum. Installing a feature license key is not disruptive, nor does it
require a switch reset. To order a license key, contact your switch distributor or your authorized reseller.
TIP:
To obtain the switch serial number and license key, follow the step-by-step instructions on the firmware
feature entitlement request certificate for the license key.

Displaying feature licenses

To display the license keys that are installed, enter the feature log command on your switch, as shown
in the following example:
8/20q FC Switch #> feature log
Mfg Feature Log:
----------------
Switch Licensed for 8 ports
Customer Feature Log:
---------------------
1) day month date 19:39:24 year - Switch Licensed for 20 ports
1-LCVXOWUNOJBE6

Installing a feature license key

To install a license key on your switch, enter the feature add command, as shown in the following
example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> feature add 1-LCVXOWUNOJBE6
License upgrade to 20 ports
Do you want to continue with license upgrade procedure? (y/n): [n] y
Alarm Msg:[day mon date time year][A1005.0030][SM][Upgrading Licensed Ports to
20]

Managing idle session timers

You can limit the duration of idle login sessions and idle Admin sessions (admin start command). You
can specify limits up to 1,440 minutes; specifying 0 means unlimited duration. Idle login sessions that
exceed the timeout limit are logged off (InactivityTimeout). An idle Admin session that exceeds the
timeout limit is ended, but the login session may be maintained (AdminTimeout). By default, no timeout
limit is enforced on idle login sessions; idle Admin sessions are ended after 30 minutes.
To display the idle login and Admin session configuration, enter the show setup system timers
command, as shown in the following example:
8/20q FC Switch #> show setup system timers
System Information
------------------
AdminTimeout
InactivityTimeout
30
0
8/20q Fibre Channel Switch command line interface guide
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks sn6000 - fibre channel switch8/20q

Table of Contents