HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual page 214

Fibre channel switch
Hide thumbs Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
Table of Contents

Advertisement

Table 49
Attribute
UserAuthServer
AccountingServer
Timeout
Retries
SignPackets
Secret
Examples The following is an example of the set setup radius common command:
8/20q FC Switch (admin) #> set setup radius common
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the attributes
for the server being processed, press 'q' or 'Q' and the ENTER key to do so.
If you wish to terminate the configuration process completely, press 'qq' or
'QQ' and the ENTER key to so do.
PLEASE NOTE:
-----------
* SSL must be enabled in order to configure RADIUS User Authentication
SSL can be enabled using the 'set setup services' command.
Current Values:
DeviceAuthOrder
UserAuthOrder
TotalServers
New Value (press ENTER to not specify value, 'q' to quit):
DeviceAuthOrder
UserAuthOrder
TotalServers
Do you want to save and activate this radius setup? (y/n): [n]
214 Command reference
Server-specific RADIUS server configuration attributes
Description
Enable (True) or disable (False) this server for user account
authentication. A user authentication RADIUS server requires a secure
management connection (SSL). The default is True.
Enable (True) or disable (False) this server for auditing of activity
during a user session. When enabled, user activity is audited whether
UserAuthServer is enabled or not. The default is False.
The accounting server UDP port number is the ServerUDPPort value
plus 1 (the default is 1813).
Number of seconds to wait to receive a response from the RADIUS server
before timing out. The default is 2.
Number of retries after the first attempt to establish communication with
the RADIUS server fails. The default is 0.
Enable (True) or disable (False) the use of sign packets to protect the
RADIUS server packet integrity. The default is False.
22-byte ASCII string (1–63 characters) used as a password for
authentication purposes between the switch and the RADIUS server.
Local
Local
1
1=Local, 2=Radius, 3=RadiusLocal :
1=Local, 2=Radius, 3=RadiusLocal :
decimal value, 0-5
:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks sn6000 - fibre channel switch8/20q

Table of Contents