Zone - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

zone

Description Manages zones and zone membership on a switch.
Authority Admin session and a Zoning Edit session. See the zoning edit command. The list, members,
and zonesets operands are available without an Admin session.
Syntax
zone
add [zone] [member_list]
list
members [zone]
orphans
remove [zone] [member_list]
rename [zone_old] [zone_new]
zonesets [zone]
Operands
add [zone] [member_list]
Specifies one or more ports/devices given by [members] to add to the zone named [zone]. Use a
<space> to delimit aliases and ports/devices in [member_list]. A zone can have a
maximum of 2,000 members. [member_list] can have any of the following formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–239; port
numbers can be 0–255.
• 6-character hexadecimal device Fibre Channel address (hex)
• 16-character hexadecimal WWPN with the format xx:xx:xx:xx:xx:xx:xx:xx.
• Alias name
The application verifies that the [members] format is correct, but does not validate that such a
member exists. You must enter the zoning save command to save your changes.
copy [zone_source] [zone_destination]
Creates a new zone named [zone_destination] and copies the membership into it from the zone
given by [zone_source]. You must enter the zoning save command to save your changes.
create [zone]
Creates a zone with the name given by [zone]. A zone name must begin with a letter and be no
longer than 64 characters. Valid characters are alphanumeric, _, $, ^, and -. The zoning
database supports a maximum of 2,000 zones. You must enter the zoning save command to
save your changes.
delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone is a component
of the active zone set, the zone will not be removed from the active zone set until the active zone
set is deactivated. You must enter the zoning save command to save your changes.
list
Displays a list of all zones and the zone sets of which they are components. This operand does
not require an Admin session.
members [zone]
Displays all members of the zone given by [zone]. This operand does not require an Admin
session.
orphans
Displays a list of zones that are not members of any zone set.
8/20q Fibre Channel Switch command line interface guide 293